Categories

Printing with Nylon

Printing with Nylon

Taulman Nylon 618

The first successful print with nylon using the Makerbot 2X.  The material used was 1.75 mm Taulman 618 Nylon. The extruder temperature was 245 and the bed was set to 70. The print speed was 50mm/s with 4 shells at .2mm layer height. Overall the print was a success but some modifications in print parameters may be required to avoid warping and incomplete layer filling at the top. Stay tuned for more.

FinkrBots First Print [Video inside]

FinkrBots First Print [Video inside]